Archtech
Request a quote0
Fire suppression

Clean agent, CO2 or water: choosing suppression for a server room

Water puts out fires but ruins electronics. Here is how clean agent, CO2 and pre-action systems compare for rooms full of equipment.

Sample article written for this concept website.

A server room, control room or archive holds equipment that water would destroy. So the question is not only how to put a fire out, but how to do it without causing more damage than the fire. There are three common approaches.

Clean agent systems

Clean agents such as FM-200 and Novec 1230 are stored as liquids and released as a gas that floods the room. They leave no residue, so equipment can often keep running after a discharge. At their design concentrations they are suitable for spaces where people work, which is why they are a common choice for server rooms and control rooms.

CO2 systems

Carbon dioxide puts fires out by reducing the oxygen in the room. It is effective and leaves no residue, but at extinguishing concentrations it is dangerous to people. CO2 systems are therefore usually used in spaces that are normally unoccupied, with warning alarms and delays so anyone inside can leave before discharge.

Pre-action sprinklers

Pre-action systems keep the sprinkler pipes dry until a detector confirms a fire. Only then does water enter the pipes, which protects against accidental leaks. They are often used where water is acceptable as a last resort but an accidental discharge would be costly.

Which one is right?

It depends on whether the room is occupied, how sealed it is, what is inside it and what your insurer and the authorities require. A site survey is the best place to start.

Not sure what your building needs?

Our engineers will survey the site and recommend the right system.

Request a site survey

← All articles

Concept by Apollos Digital · press ⌘K to search